The LLC NPC ETM company produces certified dynamic non-foundation railcar scales of the Pulsar trademark - ETM VVT-25DR1T.
ETM VVT-25DR1T - non-foundation scales for weighing wagons and trains in motion on continuous rails are designed for use on the main railway tracks. ETM VVT-25DR1T do not require construction work. The lack of a foundation allows you to install the scales in 4-5 hours. The load receiving device is the rail itself with rail deformation sensors with a rail beam and 12 S-shaped sensors.
The maximum weight limit of the wagon is 200 tons, readout resolution is 50 kg. Movement speed when weighing up to 50 km/h.
Weighing error ± 1%. The speed of movement without weighing is not limited. Information from the load receptor of the scales is transmitted via cable to the weight terminal at a distance of up to 2.5 km. After passing the train, the weighing terminal outputs to the printer a weighing protocol containing: the weight of the train, the serial number of the car in the train and its weight, the number of axles, the speed of the car during weighing, the displacement of the center of gravity of the car and information about the presence of defects on the surface of the wheels.
BENEFITS AND FEATURES:
1. Dynamic trolley weighing of wagons in the speed range from 10 km/h to 50 km/h.
1. Dynamic trolley weighing of wagons in the speed range from 10 km/h to 50 km/h.
3. Used on the main and receiving-departure tracks of railways.
3. Used on the main and receiving-departure tracks of railways.
5. If it is necessary to transfer the scales to another place, no capital costs are required.
6. Scales are mounted on the road in 3-4 hours.
7. The weighing terminal allows you to automate the weighing procedure, remembers the results of weighing up to 1000 compositions that have passed through the scales.
8. Ability to communicate with the weighing terminal via a GSM modem:
6. Scales are mounted on the road in 3-4 hours.
-Remote access for the purpose of the necessary diagnostics, taking measures to restore the balance to working capacity.
9. Calibration of scales can be carried out by the Customer independently in the presence of weighing means and in the presence of the State Verifier.
10. Software modules supplied with ETM VVT-25DR1T scales are integrated with the Customer's software (1C Accounting), as well as in the SAP resource planning system
11. Self-diagnostics of electronics of scales with an output of information on malfunctions on the display of the weight terminal.
11. Self-diagnostics of electronics of scales with an output of information on malfunctions on the display of the weight terminal.
| – video surveillance system with recognition of wagon numbers; | – video surveillance system with recognition of wagon numbers; |
| average | 11. Self-diagnostics of electronics of scales with an output of information on malfunctions on the display of the weight terminal. |
| average | 11. Self-diagnostics of electronics of scales with an output of information on malfunctions on the display of the weight terminal. |
| Maximum weighing limit for the wagon axle, t | Maximum weighing limit for the wagon axle, t |
| Maximum weighing limit for the wagon axle, t | Maximum weighing limit for the wagon axle, t |
| averageaverageaverageaverageaverageaverage | Maximum weighing limit for the wagon axle, t |
| Operating temperature range, ° С: | |
| Loading platform | from minus 30 to + 45 |
| Weighing terminal | from + 10 to + 45 |
| Degree of protection against dust and moisture according to DSTU EN 60529: | |
| Loading platform | IP55 |
| Weighing terminal | IP40 |
| Maximum weighing limit for the wagon axle, t | - from a direct current source, V. |
| - from a direct current source, V. | Maximum weighing limit for the wagon axle, t |
| Average service life, years | 10 |
| Overall dimensions of the load receiving beam, mm | Overall dimensions of the load receiving beam, mm |
WAGON SCALE Automation
The automation system of wagon scales is designed to identify the weighed vehicle, in order to reduce the time spent on cargo clearance, eliminate errors associated with the influence of the human factor, as well as to completely exclude a person from the weighing process.
Automation of weighing facilities through the introduction of wagon number recognition systems is a solution that allows you to bring production to a new level. Recognition of wagon numbers - allows for additional control over the activities of weight control points. The software product qualitatively recognizes car numbers, automatically registers, records and controls the movement of rolling stock of railway transport. This system can be used both independently and integrated into the existing information system of the enterprise or, without being part of it, provide effective interaction with it.
The automation system also includes integration with the SAP resource planning system.
WEIGHT SERVICE
The company "NPTs ETM" LLC offers professional maintenance services for scales of various types and purposes, including: automobile, wagon, bunker, for weighing liquid and bulk cargo, platform, for animals.
Our specialists will perform all the necessary types of work to check and repair the equipment, as well as provide solutions for other tasks related to its proper maintenance. In addition, the company NPC ETM LLC offers the organization of verification of scales, including the call of a verification officer, the provision of verified reference weights and the supply of a weighing car.
